Cannabis Extraction Lab Safety Equipment: The Complete Compliance Checklist

A cannabis extraction lab passes its safety inspection on six systems, and inspectors check them in a predictable order: a room classification stamped by a licensed engineer (NFPA 70 Article 500; Class I Division 1 for any room where hydrocarbon solvent is open to the air), fixed gas detection alarmed at or below 25 percent [...]

By |2026-10-21T16:17:11+00:00April 2nd, 2026|Cannabis Safety, Extraction Techniques, Lab Techniques|Comments Off on Cannabis Extraction Lab Safety Equipment: The Complete Compliance Checklist

Cannabis Remediation: When to Fix, Reprocess, or Destroy a Failed Batch

What Is Remediation in Cannabis Processing? Cannabis remediation is the processing step that takes a batch that failed state testing back under the limit and through a retest: a kill step on flower for microbial failures (ozone, radio frequency heating, X-ray, electron beam, or heat), distillation on extract for the same failure, an extended thin-film [...]

By |2026-10-29T16:04:34+00:00March 15th, 2026|Cannabis Safety, Lab Techniques, Post-Processing|Comments Off on Cannabis Remediation: When to Fix, Reprocess, or Destroy a Failed Batch

How Sprayed Flower & Fake Weed Is Made: The Hidden Danger in Cannabis Markets

If you've ever wondered why that bag of flower hits harder than anything you've ever smoked — but leaves you feeling off — you might be smoking sprayed cannabis. The sprayed flower epidemic is one of the cannabis industry's dirty secrets, and it's more widespread than most consumers realize. In this breakdown based on WKU [...]

By |2026-10-13T17:44:43+00:00February 26th, 2026|Cannabis Education, Cannabis Safety|Comments Off on How Sprayed Flower & Fake Weed Is Made: The Hidden Danger in Cannabis Markets

Cannabis Extraction Lab Safety: Preventing Explosions with Proper C1D1 Setup, LEL Monitoring & SOPs

If you’re running a cannabis or hemp extraction laboratory, lab safety isn’t optional — it’s the difference between a successful operation and a catastrophic failure. In this guide based on WKU Consulting’s lab safety breakdown, we cover the critical safety protocols every extraction lab needs to implement from day one. SOPs Are Your First Line [...]

By |2026-10-14T16:26:22+00:00February 20th, 2026|Cannabis Safety|1 Comment

How to safely handle large quantities of Ethanol

Standard Operating Procedure (SOP) for Safe Storage and Handling of Industrial Scale Ethanol Purpose: This SOP outlines the guidelines for the safe storage and handling of industrial scale ethanol in order to prevent accidents and injuries. Scope: This SOP applies to all employees who handle or work with industrial scale ethanol in the facility. Definitions: [...]

By |2026-03-06T22:33:38+00:00December 31st, 2022|Cannabis Safety|Comments Off on How to safely handle large quantities of Ethanol

How to handle Pyrophoric Reagents

Pyrophoric reagents are chemicals that spontaneously ignite upon exposure to air. They are highly reactive and can pose a serious hazard in the laboratory, especially in the field of organic chemistry where they are often used. It is important to handle these reagents with caution and follow proper safety procedures to prevent accidents and injuries. [...]

By |2026-03-06T22:34:35+00:00December 30th, 2022|Cannabis Safety|Comments Off on How to handle Pyrophoric Reagents
Go to Top