How to Make Piatella from CBD

A comprehensive technical guide to authentic solventless piatella production and the CBD-derived alternative pathway, from first principles of trichome chemistry through finished product. https://youtu.be/ARQ7Ke7Stz8 Introduction What is piatella? Piatella is not a strain and not a product category. It is a cold-cure technique applied to full-melt ice water hash: fresh-frozen flower (frozen within 15 to [...]

By |2026-10-05T16:12:13+00:00March 25th, 2026|Cannabis Chemistry, Cannabis Education, Extraction Techniques, Post-Processing|Comments Off on How to Make Piatella from CBD

The Complete Guide to Vacuum Oven Purging for Cannabis Concentrates

Vacuum oven purging removes residual butane, propane, or ethanol from cannabis concentrates by holding material at 100 to 115°F (38 to 46°C) under full vacuum at -29.5 inHg for 24 to 72 hours. BHO concentrates spread to 1 to 2 mm film thickness at 100°F reach compliant residual solvent levels (below 5,000 ppm total hydrocarbons [...]

By |2026-10-06T16:27:22+00:00March 22nd, 2026|Lab Techniques, Post-Processing|Comments Off on The Complete Guide to Vacuum Oven Purging for Cannabis Concentrates

What is Wiped Film Distillation? The Complete Guide to Cannabis Oil Purification

Wiped film distillation purifies cannabis crude oil to 90-95% total cannabinoids by spreading a sub-1mm film across a heated cylinder at 160-180°C under sub-100-micron vacuum. Residence time is 1-3 minutes (vs 10-60 minutes in short path), reducing thermal CBN formation from 4% to under 0.5%. A 2-inch Pope system processes 500-800 mL/hour at 30% rotor [...]

By |2026-10-01T16:16:39+00:00March 18th, 2026|Lab Techniques, Post-Processing|Comments Off on What is Wiped Film Distillation? The Complete Guide to Cannabis Oil Purification

Cannabis Remediation: When to Fix, Reprocess, or Destroy a Failed Batch

What Is Remediation in Cannabis Processing? Cannabis remediation is the processing step that takes a batch that failed state testing back under the limit and through a retest: a kill step on flower for microbial failures (ozone, radio frequency heating, X-ray, electron beam, or heat), distillation on extract for the same failure, an extended thin-film [...]

By |2026-10-05T21:20:42+00:00March 15th, 2026|Cannabis Safety, Lab Techniques, Post-Processing|Comments Off on Cannabis Remediation: When to Fix, Reprocess, or Destroy a Failed Batch

Color Remediation Chromatography (CRC): The Complete Guide

What Is Color Remediation Chromatography? Color remediation chromatography (CRC) is a post-extraction purification technique that uses layered adsorbent media in a pressurized column to selectively remove pigments, chlorophyll, carotenoids, and other color-causing impurities from cannabis extracts. Originally adapted from the edible oil refining industry: where magnesium silicate and activated carbon have been used for decades [...]

By |2026-09-28T17:34:51+00:00March 9th, 2026|Extraction Techniques, Lab Techniques, Post-Processing|Comments Off on Color Remediation Chromatography (CRC): The Complete Guide
Go to Top